The CA190 Tiltima is equipped with the following accessories in the package:
a) Chest Strap * 1
b) Thigh Straps * 2
c) Calf Straps * 2
d) Working Table * 1
All 4 corners of the CA190 Tiltima are supported by a 5” inch castor with Swivel Lock and Brake. The Frame Construction is made with Steel Tubes of (a) 6 * 3cm and (b) 7 * 3cm Dimensions and by the thickness of 2mm.
For absolute safety requirement, the CA190 Tiltima is equipped with a “1-PULL EMERGENCY HANDLE” at the back of table. When in an emergency situation where no utility power is available, the emergency handle can be pulled to allow the table top to be moved back from vertical to horizontal position and the patient can then be strapped and transferred to normal patient’s bed.
In any given case of loss of utility power, just pull on the RED EMERGENCY HANDLE at the back of table to disengage the Motorized Actuator (otherwise locked) to allow the patient to be unstrapped and lifted off the table.

CA190 Tiltima is equipped with 2 motors and controlled by a (2 Buttons) Hand Control:
• 1st Motorized Actuator: Height Adjustment (55~90cm)
• 2nd Motorized Actuator: Tilt Angle Adjustment (0o~90o)